Product uses and Coverage Rates

Xypex Admix Dosage Rates – Always contact SMR Projects for a specification

The required dosage rate of Xypex Admix is 1 - 1.5% of the total cementitious content as determined by the ready mix supplier. For more information please contact the SMR Projects Technical Department. This usually results in the specification being 4 kg’s per cubic meter, however this may increase if the concrete mix design requires it, such as a spray applied or a self-compacting concrete.

Xypex Coatings – refer to coverage below

Usage – To be used as a guide only as individual projects may differ – Always contact SMR Projects for a complete specification

Xypex Concentrate Slurry Coat

Measure   Concentrate Modified
Single Slurry Coat kg/sq.m 1.0 n/a
One of Two Slurry Coats kg/sq.m 1.0 1.0


Xypex Concentrate Dry Pac

Measure   Concentrate Modified
Filling a 20mm x 20mm rebate kg/m 0.6 n/a
Filling a 25mm x 25mm rebate kg/m 0.98 1.0
Filling a 37mm x 25mm rebate kg/m 1.4  

The above is a guide only. Actual Usage may vary according to the project.

Xypex Patch’n Plug
One 25kg pail of Xypex Patch’n Plug will produce 0.0141 m³ of mortar

Xypex Megamix I
Required coating thickness will vary depending on project requirements. At the recommended thickness of 3.2mm, one 27.2 kg pail of Megamix I will cover 4.4m². For application thickness exceeding 10mm please contact us.

Xypex Megamix II
At 1/2” (12.5mm) thickness, each 27.2kg of Megamix II will cover 1.14m².