NON XYPEX PRODUCTS

HYDROSWELL BENTOSTRIP

Hydroswell Bentostrip is a green flexible hydrophilic strip of app. 20 x 20 mm, made of natural sodium bentonite clay and synthetic rubber.

Due to the shrinkage of the drying concrete, small cracks and voids will appear in the construction and cold joints, through which water can penetrate.

In contact with water, Hydroswell Bentostrip will swell approximately 400% of its original dry volume(*). The expansive clay mass will thus seal these hairline cracks and voids in the joint.

The first expansion is retarded to prevent the strip from reacting too soon with possible rainwater, before or during the installation.

Download the Data Sheet PDF here

Download the Safety Data Sheet PDF here

For specific information including Test Data and Application procedures on this product, please download a product data sheet, view our joint details page or call 01295 279747
*Tested under laboratory conditions

Download the BBA certificate here

 

 

 

Hydroswell Bentostrip

HYDROSWELL BENTOSTEEL

Hydroswell Bentosteel is used for the secure installation of Hydroswell Bentostrip in horizontal and vertical applications. Easy to install by nailing (1 nail every 25 cm).

Download the Data Sheet PDF here

For specific information including Test Data and Application procedures on this product, please download a product data sheet or call 01295 279747

Bentosteel

HYDROSWELL SEALANT

Hydroswell Sealant is a one-component, polyurethane based, solvent free, Hydro swelling mastic, supplied in cartridges and aluminium sausages, for the sealing of construction joints and around pipe penetrations.

Hydroswell Sealant cures and swells in the presence of moisture.

Curing time depends on temperature and humidity conditions, i.e. curing time will reduce if RH and C° are higher. Hydroswell Sealant will become firm in 24-36 hours.

Performance is not affected by the curing time.

Download the Data Sheet PDF here

Download the Safety Data Sheet PDF here

For specific information including Test Data and Application procedures on this product, please download a product data sheet, view our joint details page or call 01295 279747 *Tested under laboratory conditions

 

 

 

Sealant